Combine adjustment can affect wheat quality in two fundamental ways: grain damage (cracked and broken kernels) and foreign material. Stay sharp with genuine Case IH cutting parts. Crisp, efficient cutting reduces grain harvest losses to shattering.
Farming usa 2 case ih combine manual#
2 If you determine your field losses are outside the acceptable range, review your combine’s operators manual or work with your Case IH dealer to fine-tune settings. Aim for less than 2 percent loss (1 bushel per acre on a 50-bushel-per-acre wheat crop) when harvesting standing wheat under good conditions. This is normally done by counting the kernels or seed in a 10-square-foot area across the swath width of the combine. You can measure field losses by counting the kernels or seed left in the field after harvest. Some harvest loss is unavoidable, but proper combine adjustment and operation and catching the crop early can minimize these losses.
Harvest losses are those caused by the combine. These pre-harvest losses are those caused by shattering and lodging, by bird and wildlife feeding and by weather and other natural causes. Some grain losses occur before you pull the combine into the field. A properly adjusted, smooth-running combine can minimize both.įield losses. Grain losses can hit your bottom line in a couple of ways: grain left in the field and dockage at the elevator due to poor quality. Keeping a close watch on combine settings will help you do that. As wheat harvest moves along, make sure you’re doing all you can to efficiently bring in the most, highest-quality grain possible.
0 kommentar(er)
